Disinfection with sodium hypochlorite requires surface preparation and adherence to the conditions specified in the product instructions. Fat, raw material residues, and other soiling do not disappear from the procedure simply because a chlorine-based product is used. Therefore, the cleaning purpose and the disinfection purpose must be specified separately in the hygiene plan.
How does cleaning differ from disinfection?
Cleaning is used to remove soiling. Disinfection is intended to reduce microorganisms to the level specified for the product and its intended use. The Italian Istituto Superiore di Sanità emphasizes that these are different tasks, and the choice of product depends on what is to be disinfected. The mere appearance of a clean surface does not confirm that disinfection has been carried out. Source: ISSalute — Disinfectants.
Why do soiling and residues interfere?
Organic substances can consume active chlorine, limiting its availability to act on microorganisms. In its February 2026 guide, INRS indicates the need to remove organic soiling before using hypochlorite. Efficacy is also determined by concentration, contact time, temperature, and application conditions—the name of the substance alone is not enough. Source: INRS ED 6188, Chapters 4.2 and 5.6.
A practical example: after finishing work, product residues and a greasy film remained on the table. Applying a chlorine-based product without prior surface preparation overlooks the soiling problem. Including only the word "disinfection" in the schedule does not explain to the worker what to do with the residue or when they can start the next step.
How to describe the work sequence?
The following outline helps organize the workstation instructions. Specific parameters and actions must correspond to the labels of the products used and the facility's procedure.
- Preparation: determine the scope of work, the type of surface, and the required safety measures.
- Removal of soiling: select a cleaning method suitable for the residue and the material's resistance.
- Completion of the cleaning step: remove soiling and cleaning product residues according to the instructions. Prevent the contact of incompatible chemicals.
- Disinfection: use the correct product, concentration, application method, and full contact time.
- Completion of the process: perform the required rinsing or other final actions, then release the surface for use according to the procedure.
Contact time is part of efficacy
If the label requires a specific contact time, do not shorten it by prematurely wiping or rinsing the surface. The conditions in the instructions should be maintained throughout the entire required step. Do not compensate for missing contact time by increasing the dose. INRS recommends selecting a product based on the full conditions of use, including the application method and the permissible level of soiling. Source: INRS ED 6188, Chapters 4.2 and 6.
Do not combine steps by mixing products
Adding hypochlorite to a random detergent does not create a tested cleaning-disinfectant product. Acids and products containing ammonia are particularly dangerous. ISSalute points out the possibility of chlorine release when in contact with acids and the formation of chloramines when in contact with ammonia. Source: ISSalute, types of disinfectants.
A ready-made cleaning-disinfectant product may have its own validated one-step procedure. However, do not apply such recommendations to a hypochlorite solution or a mixture prepared yourself. The instructions for the specific product determine how it should be used.
Five questions to check the procedure
- Does the worker know which soiling must be removed before disinfection?
- Is the product intended for the given surface and the expected scope of action?
- Are the concentration and contact time clearly specified?
- Has the method for completing the process, including required rinsing, been established?
- Does the work record allow the product used, the parameters, and any deviations to be reconstructed?
This is a proposal for organizational control, not proof of microbiological efficacy. If the facility's hygiene plan provides for testing or other verification methods, a signature on the work record alone does not replace them.
You can find the product documentation on the APOLA stabilized sodium hypochlorite page. See also the guide to reading labels and safety data sheets.
Biocidal products must be used with due caution. Read the label and product information before each use.
Prepared by: APOLA Editorial Team. Sources verified on November 14, 2026. The text concerns surfaces; it is not an instruction for the disinfection of skin, food, or drinking water.