APOLA Editorial Team · Content and product sheet verification: November 10, 2026
You can calculate the cost of chemicals in one litre of working solution by multiplying the price per litre of concentrate by its dosage in litres. If a product costs PLN 24 per litre and the instructions for a given task specify 10 ml per litre of finished solution, the cost is PLN 0.24. The price of the container alone does not tell you which product will be cheaper to use.
A comparison only makes sense when both products are suitable for the same surface, soiling, and working method. A cheaper solution is not a saving if it requires rewashing or does not meet the conditions of use. Below you will find formulas, a table, and a simple way to check whether the team is actually measuring out the planned amount.
What exactly does the cost of one litre of working solution mean?
A working solution is a mixture prepared to perform a specific task, such as washing floors. The concentrate makes up only part of its volume. First, determine whether you want to compare the cost of the product itself or the full cost of the service.
In this guide, the cost per litre means the cost of the concentrate used per litre of finished mixture. It does not include water, energy, labour, equipment, or waste disposal. Such an indicator helps compare chemicals, but does not replace the calculation of the entire cleaning process.
Also separate the net price from the gross price. Choose one basis and apply it to all items. If you add transport to the purchase cost, allocate it according to the described principle; do not compare one product with delivery to another without delivery.
How to calculate the cost of the solution — three steps
1. Calculate the price per litre of concentrate
Price per litre of concentrate = container price ÷ capacity in litres. A model 5-litre container costing PLN 120 net gives PLN 24 net per litre. If the package states the mass, for example 5 kg, do not automatically enter 5 l: kilograms and litres describe different quantities.
Converting mass to volume requires the correct density, if the supplier provides it. When comparing products priced in kilograms, you can instead perform calculations in grams per litre of solution. Maintain consistency of units throughout the sheet.
2. Read the dosage for a specific task
Note the dosage from the current label or manufacturer's instructions. The notation "10 ml" is incomplete: you need to know whether it refers to a litre of water, a litre of final solution, a bucket, or a machine tank. Also check what soiling and application method the recommendation refers to.
If the instructions provide a range, use the dosage justified by the conditions at your facility for comparison. Do not choose the lowest value just to improve the cost result. The importance of dosing conditions is also evident in the EU Ecolabel criteria for hard surface products, which take into account the level of soiling and, where applicable, water hardness. These are labelling criteria, not universal instructions for all products.
3. Convert millilitres to litres and multiply
For a dosage expressed in ml per litre of finished solution, use the formula:
Example: (PLN 120 ÷ 5 l) × (10 ml ÷ 1000) = PLN 0.24 net/l.
The theoretical yield of the container is then: capacity in litres × 1000 ÷ dosage in ml/l. For 5 l and 10 ml/l, you get 500 l of finished solution. The result assumes the use of the entire container; residues in the container and spills will reduce the actual yield.
Comparison table: a more expensive container can yield a cheaper solution
The two products below are fictional calculation variants A and B. The prices and dosages do not come from the APOLA offer. We assume the same effectiveness in a given task, appropriate material compatibility, and dosing per litre of final solution.
| Parameter | Variant A | Variant B |
|---|---|---|
| Container | 5 l | 5 l |
| Model net price | PLN 120 | PLN 180 |
| Price of 1 l concentrate | PLN 24 | PLN 36 |
| Assumed dosage | 10 ml/l | 5 ml/l |
| Theoretical yield | 500 l | 1000 l |
| Cost of chemicals in 1 l solution | PLN 0.24 | PLN 0.18 |
| Cost for 880 l solution | PLN 211.20 | PLN 158.40 |
Variant B costs PLN 60 more per container, but in this model, it gives a lower usage cost of PLN 0.06 per litre. At a consumption of 40 l per day for 22 days, this is PLN 52.80 net per month. This is the result of the assumptions made, not a promise of savings after changing the product.
Before deciding, check the working time and the result on a representative section of the surface. If variant B requires an additional step or longer washing, include this in the full cost. Compare the effect achieved according to the instructions, not just the amount of foam or the intensity of the scent.
Percentages, millilitres, and proportions: where are errors most likely?
"1%" requires defining the basis
If the manufacturer defines 1% as the volume fraction of the product in the final solution, this corresponds to 10 ml of product per 1 l of final mixture. Preparation involves measuring out the product and topping up with water to the target volume, in the order and conditions specified in the instructions. This is not automatically 10 ml added to a full litre of water.
Mass concentration, active substance content, and commercial product content are different concepts. Do not substitute them without the manufacturer's definition and data. If the description is ambiguous, clarify it with the supplier before preparing instructions for employees.
"1:100" can be understood in two ways
When the notation means one part product to one hundred parts water, the number of parts is different from one part product in one hundred parts solution. Do not assume that every manufacturer uses the same convention. It is better to place an unambiguous instruction in the job card, for example, the amount of product and the target volume of the container, in accordance with the confirmed instructions.
Dosage per litre of water requires a different denominator
If the instructions require adding 10 ml to 1 l of water, calculate the cost for the actually prepared final volume. In a simplified model of adding volumes, you will get approximately 1.01 l of mixture, not exactly 1 l. In practical calculations, use the manufacturer's definition and the working volume; do not pretend laboratory precision when measuring out with a bucket.
How much does pouring "by eye" cost?
Let's return to model variant A. The planned dosage is 10 ml/l, but employees actually use 15 ml/l. The cost of the solution increases from PLN 0.24 to PLN 0.36 net/l, which is 50% compared to the plan.
For 880 l per month, this gives PLN 316.80 instead of PLN 211.20. The difference is PLN 105.60. Returning from an excessive dosage to the assumption reduces this specific cost by one third compared to the value of PLN 316.80; not by 50%.
This example is not a recommendation to lower the concentration. It shows the cost of deviating from the assumed, correct instructions. If a higher dosage is needed and permitted for tougher soiling, it should be correctly described and included in the budget.
How to check dosing in a company within one week?
- Choose one task. For example, daily washing of a specific floor with one method. Do not combine daily washing and periodic deep cleaning in one result.
- Record the product, dosage, and volume. Note the source of the instructions and the date they were checked. Use one measuring device and clear fill markings.
- Check the actual output of the dispenser. Compare the measured portion with the assumption in a way permitted by the manufacturer of the device and the product. Do not assume that every pump dispenses the same amount.
- Record the prepared batches. Record the number of fills, the volume of the solution, and the consumption of concentrate. Separate spills, residues, and other uses of the product.
- Assess the work result. Note the need for correction, the working time, and comments regarding the surface. A drop in consumption alone does not confirm effective washing.
- Explain the discrepancies. Check the instructions, the scale of the measuring device, the output of the device, and the change in the level of soiling. Only then make a decision to change the process.
If you know the concentrate consumption in millilitres and the amount of prepared solution in litres, the ratio of these values will show the average dosage in ml/l. This result is only reliable when the measurements concern the same batches and period. Warehouse purchases are not equivalent to consumption.
Measuring cup, pump, or dosing system?
A measuring cup is a simple solution for a small number of preparations. However, it requires a clear scale, appropriate accuracy, and user consistency. A large cup with sparse markings may not be suitable for a small dosage.
A dispensing pump simplifies work with repeatable portions, but you need to know the actual portion size and confirm compliance with the product. The number of presses should result from the job card instructions, not from habit. When changing the product or pump, the check must be repeated.
An automatic system can limit manual measuring with higher consumption. It requires proper selection, setting, servicing, and control; installation alone does not prove savings. Evaluate the purchase, operation, product consumption, and washing result together.
Safe handling of concentrate is based on the current documentation. Before working, read the safety data sheet available in the "Downloadable Documents" section on the card of the selected product, including information on hazards, procedures, and user protection. The sheet does not replace the label and product instructions.
How to apply calculations to APOLA products?
For manual dishwashing, the following products can be considered, according to their current sheets. These are not products A and B from the model table. They have actual instructions, and their dosages must not be replaced by the example 5 or 10 ml per litre from previous calculations.

LUCIO mint 5 l · A2405
For manual washing of dishes, cutlery, and washable kitchen accessories. The sheet states 3–8 ml per 5 l of warm water; after washing, dishes should be thoroughly rinsed with water intended for consumption. Not for automatic dishwashers or food washing.
Check LUCIO and documentation
APRIL ultra 5 l · A0505
For manual washing of dishes and waterproof, washable surfaces. The sheet states 2–6 ml per 5 l of warm water, depending on the soiling and water hardness. Surfaces that come into contact with food require thorough rinsing. Not for automatic dishwashers or food washing.
Check APRIL and documentationExample with the current price: cost of one portion of LUCIO
On November 10, 2026, the LUCIO 5 l sheet indicated PLN 14.47 net / PLN 17.80 gross. The cost of 1 ml is therefore 14.47 ÷ 5000 = PLN 0.002894 net. A model portion of 5 ml costs PLN 0.01447 net, which is about 1.45 groszy; this is the cost of the product added to 5 l of water, without the cost of water and other process components.
A 5 ml portion fits within the range given on the sheet, but does not replace the selection of the dosage for washing conditions. Do not automatically divide this value by 5 as the exact cost of the final litre of solution: the product instructions refer to litres of water. Prices may change; enter the current price at purchase into your own sheet.
You can compare usage ranges in the guides LUCIO or APRIL ultra? and how to choose a product for soiling and surfaces. Product selection precedes price calculation.
Checklist before ordering the next container
- Is the product intended for this surface and working method?
- Am I comparing prices on the same net or gross basis?
- Do capacity, mass, and dosage have consistent units?
- Do I know the definition of percentage or proportion from the instructions?
- Does the dosage correspond to the actual soiling and conditions at the facility?
- Have I calculated the cost of the solution as well as the cost of corrections and labour?
- Can I measure this amount with the available equipment?
Most common questions about cost and dosing
Is a larger container always cheaper?
No. Compare the unit price, dosage, and actual possibility of using the product. Include storage conditions, expiration date, and the amount remaining in the container. Buying a larger quantity without a consumption plan can worsen the result.
Must a ready-to-use product be more expensive than a concentrate?
There is no such general rule for the entire process. A product ready to use simplifies preparation; a concentrate can give a lower chemical cost, but requires proper measuring. Compare the same task and include handling time.
Can I dilute soap to use this calculator?
Do not draw such a conclusion. Calculations concern only products intended by the manufacturer for dilution. Evaluate soap and other ready-to-use products according to their documentation and the output of the appropriate dispenser.
Does the concentration alone determine disinfection effectiveness?
No. The cost table does not confirm the use of a biocidal product or the required effectiveness. For such a product, check the documentation regarding the specific application, including concentration, time, and other usage conditions. Do not change these parameters to achieve a lower cost.
Do you need to compare products for your facility?
Send APOLA the name of the surface, type of soiling, washing method, and data on the current product and its dosing. This will allow the selection to begin and the cost to be calculated on common assumptions. Contact: sklep@apola.pl · +48 61 616 62 66.
Sources and assumptions of calculations
The calculations are an original calculation model. Prices, dosages, and A/B consumption are hypothetical and do not constitute an offer or product test results. No APOLA product has been assigned a certificate or properties based on these sources.
- EUR-Lex: decision (EU) 2017/1217, consolidated version of 29.03.2023, criteria 6–7 — context of matching the dosage to the conditions of use in the EU Ecolabel criteria.
- APOLA: LUCIO mint 5 l — manufacturer's sheet, instructions, and price read on 10.11.2026.
- APOLA: APRIL ultra 5 l — manufacturer's sheet and instructions read on 10.11.2026.